RML.Labs.SawStudio.FX.Plugin.FreqAnalyzer.v1.7

SUPPLIER ..: TEAM AiR
PROTECTION : $$$
SIZE ......: 01 * 4,77MB
DATE ......: 10/2009

The Frequency Analyzer provides a powerful new way to
look at  the frequency  content of  audio material in
real-time, as it  plays in the  SAWStudio MultiTrack.
You may patch  the analyzer into  any input track  to
view individual  signals, or  into any  output track,
where  you  can  see  the  combined  mix  of multiple
signals, or still see any individual signal by  using
the solo buttons on the virtual console.

The Analyzer has  a powerful interface  that displays
50  individual   bands  of   hi-resolution  frequency
filters. The  meters respond  in exact  real-time and
the  response  decay  rate may  be  adjusted  to four
different speeds.

The 50  filter center  frequencies are  automatically
calculated in  a logarithmic  manner from  the center
filter out in both directions. You may further adjust
any filter frequency to  an exact value in  one-cycle
increments. Any filter can be selected as the  center
filter  and  the  display  can  be  recalculated from
there.  The  display can  be  zoomed horizontally  to
narrow  down the  range that  the 50  filters cover,
giving unlimited control as  to where you focus  your
display.

The level range  of the meter  display can be  offset
from  zero  dB down  to  an incredible  -132  dB. The
display can also be zoomed vertically to narrow  down
the dB range  that the meter  segments cover, from  a
default range  of 45  dB to  as little  as 4 dB. This
allows  readout  displays  of  1dB  to  span   across
multiple  meter segments  giving incredible  detailed
display possibilities.

The bandwidth of the 50 filters can be adjusted  from
one octave down  to a very  tight .005 octaves.  This
allows you to create displays that can separate  very
small frequency differences  between bands, even  the
ability to see different  notes of the musical  scale
peaking different individual filters.

A  freeze button  allows you  to freeze  the display
during  playback  to  look  at  the  details  of each
filter.

A powerful Listen option  allows you to listen  in on
any single filter or  combination of filters to  find
troublesome tonal areas of a particular instrument or
mix.  You  can  then  get  an  exact  readout  of the
troublesome frequency and know exactly how to  adjust
your console eq to correct the problem, then actually
see the difference on the display.

Preset  configurations  can  be  saved  and recalled,
making it easy to recreate complex setups.

All in all,  this tool quickly  becomes one that  you
wonder how you lived without, once you experience its
powerful capabilities in assisting you to create that
perfect mix.

http://www.sawstudio.com

Installation Notes :

1) Unzip, Unrar and run Setup.exe

2) Enjoy this fine Team AiR release !!!

nFO lAYOUT (c) 2006 bEARCAVE-dESIGN