SOLIDWORKS - Advanced Simulation\3.2. Simplifying the Conrod Fillet Geometry\11.Running the analysis and comparing results with the original Conrod model.en.srt |
18,952 |
793EEE7F |
SOLIDWORKS - Advanced Simulation\3.2. Simplifying the Conrod Fillet Geometry\09.Remeshing the simplified geometry.mp4
[c75ff94661fc4268]
|
31,209,559 |
BB16B516 |
SOLIDWORKS - Advanced Simulation\3.2. Simplifying the Conrod Fillet Geometry\09.Remeshing the simplified geometry.en.srt |
12,286 |
50AA6BFC |
SOLIDWORKS - Advanced Simulation\3.2. Simplifying the Conrod Fillet Geometry\10.Defining new loads and boundary conditions.en.srt |
5,494 |
D3DB0D4D |
SOLIDWORKS - Advanced Simulation\3.2. Simplifying the Conrod Fillet Geometry\11.Running the analysis and comparing results with the original Conrod model.mp4
[f6d29bc081fc383c]
|
47,813,616 |
D4AFE8CF |
SOLIDWORKS - Advanced Simulation\3.2. Simplifying the Conrod Fillet Geometry\08.Using the geometry fixup tool.en.srt |
9,001 |
BF24C62E |
SOLIDWORKS - Advanced Simulation\3.2. Simplifying the Conrod Fillet Geometry\08.Using the geometry fixup tool.mp4
[f668ccbfd866fbf7]
|
16,822,478 |
5352AC0A |
SOLIDWORKS - Advanced Simulation\3.2. Simplifying the Conrod Fillet Geometry\10.Defining new loads and boundary conditions.mp4
[b3b606138840424b]
|
12,003,527 |
163170EA |
SOLIDWORKS - Advanced Simulation\Exercise Files\Ex_Files_SOLIDWORKS_Advanced_Simulation.zip
[1dccc80032362b5d]
|
902,886,047 |
D7BFC3AF |
SOLIDWORKS - Advanced Simulation\1.Introduction\01.Welcome.en.srt |
735 |
6D0F790D |
SOLIDWORKS - Advanced Simulation\1.Introduction\02.What you should know.mp4
[f62d1b1fd1a03d3c]
|
1,035,637 |
E83098ED |
SOLIDWORKS - Advanced Simulation\1.Introduction\02.What you should know.en.srt |
1,194 |
4A2A0126 |
SOLIDWORKS - Advanced Simulation\1.Introduction\03.Exercise files.en.srt |
1,507 |
1E0DCDAE |
SOLIDWORKS - Advanced Simulation\1.Introduction\03.Exercise files.mp4
[813d90478f528989]
|
1,744,208 |
9FCA2965 |
SOLIDWORKS - Advanced Simulation\1.Introduction\01.Welcome.mp4
[6dbd3961f10b68b9]
|
2,056,762 |
3843D969 |
SOLIDWORKS - Advanced Simulation\5.4. The Plane Strain Method\20.Running a plane strain analysis and interpreting results.en.srt |
18,135 |
CE6E2BF3 |
SOLIDWORKS - Advanced Simulation\5.4. The Plane Strain Method\18.Set up and meshing for plane strain analysis.mp4
[5487d5041e34472]
|
25,717,116 |
F5B6319A |
SOLIDWORKS - Advanced Simulation\5.4. The Plane Strain Method\19.Loads and boundary conditions for plane strain analysis.mp4
[3562ee2c1fd4770a]
|
12,119,576 |
171E4BB0 |
SOLIDWORKS - Advanced Simulation\5.4. The Plane Strain Method\18.Set up and meshing for plane strain analysis.en.srt |
14,203 |
0F9AE930 |
SOLIDWORKS - Advanced Simulation\5.4. The Plane Strain Method\17.An overview of the plane strain method.mp4
[54e4dbba11ac863b]
|
14,198,695 |
56F97AD4 |
SOLIDWORKS - Advanced Simulation\5.4. The Plane Strain Method\17.An overview of the plane strain method.en.srt |
13,192 |
E35134B1 |
SOLIDWORKS - Advanced Simulation\5.4. The Plane Strain Method\20.Running a plane strain analysis and interpreting results.mp4
[7aaf65f9160cb4ca]
|
32,588,627 |
38A5B1FB |
SOLIDWORKS - Advanced Simulation\5.4. The Plane Strain Method\19.Loads and boundary conditions for plane strain analysis.en.srt |
6,877 |
78421C4A |
SOLIDWORKS - Advanced Simulation\6.Conclusion\22.Next steps.mp4
[f5c90658f503487e]
|
10,812,744 |
EFA53CB6 |
SOLIDWORKS - Advanced Simulation\6.Conclusion\21.Wrap up.mp4
[2dbf7603faeec465]
|
12,238,150 |
448CCD44 |
SOLIDWORKS - Advanced Simulation\6.Conclusion\22.Next steps.en.srt |
5,138 |
F98C5EEC |
SOLIDWORKS - Advanced Simulation\6.Conclusion\21.Wrap up.en.srt |
15,772 |
2D0AB12C |
SOLIDWORKS - Advanced Simulation\2.1. Conrod Half Symmetry Model\06.New loads and boundary conditions.mp4
[2113bcbcdc6b25a5]
|
15,375,314 |
5D817D3E |
SOLIDWORKS - Advanced Simulation\2.1. Conrod Half Symmetry Model\04.Breaking up the geometry model.mp4
[7e0a20f08371ebd0]
|
22,915,942 |
03B73CF7 |
SOLIDWORKS - Advanced Simulation\2.1. Conrod Half Symmetry Model\07.Analysis and comparison with the full model.en.srt |
5,197 |
71D79690 |
SOLIDWORKS - Advanced Simulation\2.1. Conrod Half Symmetry Model\06.New loads and boundary conditions.en.srt |
5,423 |
8D15E79B |
SOLIDWORKS - Advanced Simulation\2.1. Conrod Half Symmetry Model\05.Meshing the half model.en.srt |
3,105 |
11DC0286 |
SOLIDWORKS - Advanced Simulation\2.1. Conrod Half Symmetry Model\05.Meshing the half model.mp4
[78d92ed5eef338f3]
|
9,569,143 |
452B459B |
SOLIDWORKS - Advanced Simulation\2.1. Conrod Half Symmetry Model\04.Breaking up the geometry model.en.srt |
10,097 |
DD3EE934 |
SOLIDWORKS - Advanced Simulation\2.1. Conrod Half Symmetry Model\07.Analysis and comparison with the full model.mp4
[f0ddc2a3485b4fcc]
|
14,162,738 |
06B86EC3 |
SOLIDWORKS - Advanced Simulation\4.3. Using the 3-2-1 Method\15.Applying the specific loads and boundary conditions for the 3-2-1 method.mp4
[667dca610885b80b]
|
23,296,303 |
85252164 |
SOLIDWORKS - Advanced Simulation\4.3. Using the 3-2-1 Method\13.Geometry splitting to accommodate the 3-2-1- method.en.srt |
7,409 |
CE8B3016 |
SOLIDWORKS - Advanced Simulation\4.3. Using the 3-2-1 Method\16.Running the analysis and comparing the results at the big and region of the Conrod.mp4
[ca1fedde7c6057e5]
|
18,512,312 |
24AB911C |
SOLIDWORKS - Advanced Simulation\4.3. Using the 3-2-1 Method\12.Description of the 3-2-1 method.mp4
[f985a5844a2c37a]
|
6,152,226 |
8FBBA13E |
SOLIDWORKS - Advanced Simulation\4.3. Using the 3-2-1 Method\14.Remeshing the revised model.en.srt |
3,838 |
96E9EB43 |
SOLIDWORKS - Advanced Simulation\4.3. Using the 3-2-1 Method\16.Running the analysis and comparing the results at the big and region of the Conrod.en.srt |
7,150 |
EED422E7 |
SOLIDWORKS - Advanced Simulation\4.3. Using the 3-2-1 Method\15.Applying the specific loads and boundary conditions for the 3-2-1 method.en.srt |
11,394 |
2FEDD4F3 |
SOLIDWORKS - Advanced Simulation\4.3. Using the 3-2-1 Method\13.Geometry splitting to accommodate the 3-2-1- method.mp4
[5162dbf7d85ffdbc]
|
17,165,915 |
4A17254D |
SOLIDWORKS - Advanced Simulation\4.3. Using the 3-2-1 Method\14.Remeshing the revised model.mp4
[45df9d97a90253f5]
|
9,777,708 |
673EF7DC |
SOLIDWORKS - Advanced Simulation\4.3. Using the 3-2-1 Method\12.Description of the 3-2-1 method.en.srt |
6,738 |
0F75AA74 |
SOLIDWORKS - Advanced Simulation\3.2. Simplifying the Conrod Fillet Geometry |
0 |
00000000 |
SOLIDWORKS - Advanced Simulation\Exercise Files |
0 |
00000000 |
SOLIDWORKS - Advanced Simulation\1.Introduction |
0 |
00000000 |
SOLIDWORKS - Advanced Simulation\5.4. The Plane Strain Method |
0 |
00000000 |
SOLIDWORKS - Advanced Simulation\6.Conclusion |
0 |
00000000 |
SOLIDWORKS - Advanced Simulation\2.1. Conrod Half Symmetry Model |
0 |
00000000 |
SOLIDWORKS - Advanced Simulation\4.3. Using the 3-2-1 Method |
0 |
00000000 |
SOLIDWORKS - Advanced Simulation |
0 |
00000000 |
|
Total size: |
1,260,357,180 |
|